Beninca Accessories (RI.P6)

The Beninca Accessories (RI.P6) is an ultra-heavy-duty mechanical drive component designed for industrial-grade gate automation. While standard residential gates typically use Module 4 (M4) racks, the Module 6 (M6) specification is engineered specifically for massive, high-tonnage gates used in industrial facilities, ports, and high-security zones. Made in Italy, the Beninca Accessories (RI.P6) rack is designed to work in perfect synchronization with Beninca’s most powerful industrial motors (like the BULL 20 or YAK series), ensuring the smooth and reliable movement of gates weighing several tons.

Heavy-Duty Module 6 (M6) Tooth Profile
The “M6” designation refers to the size and pitch of the gear teeth. Module 6 teeth are significantly larger and deeper than standard rack teeth, providing a much greater surface area for contact with the motor’s pinion. This is critical for handling the immense startup torque required to move gates that weigh 2000KG, 3000KG, or more. The deep-tooth profile ensures that there is zero slippage, even under extreme loads or when the gate is subjected to high wind resistance, providing a positive and powerful drive at all times.

Solid Steel Construction for Industrial Loads
The Beninca Accessories (RI.P6) is manufactured from high-tensile, solid steel. At this industrial scale, structural rigidity is paramount. The thick steel profile prevents the rack from warping or twisting under the weight of the gate. This durability ensures that the “mesh” between the motor and the gate remains constant over the entire length of travel. By maintaining perfect alignment, the Beninca Accessories (RI.P6) reduces the vibration and mechanical noise often associated with moving massive structures, resulting in a more controlled and professional gate cycle.

Hot-Dipped Galvanized Protection
Industrial gates are often located in harsh environments, from coastal docks to dusty factories. To combat rust and chemical corrosion, the Beninca Beninca Accessories (RI.P6) undergoes a hot-dipped galvanization process. This creates a thick, protective zinc layer that bonds to the steel, ensuring that the gear teeth remain sharp and rust-free for decades. Unlike painted or electroplated racks, the galvanized finish of the Beninca Accessories (RI.P6) is designed to withstand the constant friction of the motor pinion without peeling or degrading.

Engineered for Intensive Use
In industrial settings, gates may open and close hundreds of times per day. The Beninca Accessories (RI.P6) is built for continuous duty cycles. Its precision-cut teeth are designed to minimize friction, which keeps the motor’s operating temperature lower and extends the life of the entire automation system. The reliability of the M6 rack makes it a “fit-and-forget” component, essential for facilities where entrance downtime is not an option and security must be maintained 24/7.

Precision Mounting and Installation
The Beninca Accessories (RI.P6) typically comes in 1-meter segments and is designed to be welded directly to the gate’s bottom rail or attached using heavy-duty industrial stand-offs. Because M6 systems involve massive forces, the mounting process is engineered to be rock-solid. Proper installation of this rack ensures that the gate’s weight is distributed evenly and that the motor can deliver its full power without straining the drive shaft.

---

📌 KEY FEATURES

Module 6 (M6) Profile: Large, deep teeth designed for high-tonnage industrial gates.

Solid Steel Build: Exceptional strength to handle gates up to 4000KG+ (depending on motor).

Hot-Dipped Galvanized Finish: Maximum protection against rust and industrial corrosion.

1-Meter Modular Lengths: Allows for easy customization to any industrial gate width.

High Torque Resistance: Engineered specifically for high-power 230V/400V industrial motors.

Precision Machined: Italian craftsmanship ensures a smooth, silent, and reliable mesh.

Vibration Dampening: Heavy-duty profile reduces mechanical “chatter” during operation.

---

📌 APPLICATIONS

Industrial Factories & Warehouses: Moving massive steel perimeter gates.

Seaports and Logistics Hubs: Reliable operation in high-salt, high-traffic environments.

Military & High-Security Sites: Providing a rugged drive path for reinforced gates.

Heavy-Duty Cantilever Gates: Ideal for wide-span gates where stability is critical.

---

📌 CONCLUSION
The Beninca Accessories (RI.P6) M6 Steel Gear Rack is the ultimate mechanical foundation for industrial gate automation. By combining the massive strength of a Module 6 tooth profile with the longevity of galvanized steel, it provides the reliability needed for the world’s heaviest gates. If you are installing a high-capacity industrial system, the Beninca Accessories (RI.P6) is the definitive choice for ensuring your entrance remains powerful, secure, and maintenance-free for the long term.

---

Link: https://murakami.com.ph/shop/

Facebook page: https://www.facebook.com/murakamiphonline

Visit the official website for more details: https://murakami.com.ph/product/beninca-accessories-ri-p6/